Non-Destructive Techniques Products & Reviews

Highly accurate, fast compact XRD system

The Glass Expansion HydraMist is a sensitive, simple-to-use spray chamber for Inductively Coupled Plasma (ICP) that allows simultaneous operation of both conventional pneumatic nebulization and cold-vapor/hydride generation. Cold vapor generation can provide more than 10-fold improvement in sensitivity on ICP for cold vapor forming elements such As, Sb, Se, Tl and Hg. The generation of volatile species of these elements resul…

The intelligent diffractometer

Optimize cement production

Imaging spectroscopic ellipsometer for spatially resolved thin film analysis

Imaging ellipsometer for precise thin film and surface characterization

The Auto SE is a new thin film measurement tool that allows full automatic analysis of thin film samples with simple push button operation. Sample analysis takes only a few seconds and provides a complete report that fully describes the thin film stack – including film thicknesses, optical constants, surface roughness, and film inhomogeneities. The Auto SE is a highly featured instrument that includes an automatic XYZ stage, r…

HM-406 Fluorescent Penetrant is a medium-high sensitivity, water-washable fluorescent penetrant for inspecting castings, extrusions, and similar parts. Designed for dip tank use with good self-developing properties. It is a versatile, general purpose penetrant for use on a variety of materials, including aluminum and magnesium castings. Complies with low-sulfur and low-halogen requirements.

BRITEMOR PENETRANT PROCESSES are approved or conform to many internationally recognized specifications. Several processes or individual products are also approved and included in independent company specifications for the inspection of new or overhauled components.CHECKMOR COLOUR CONTRAST (RED DYE) PENETRANT PROCESSES are versatile and economic method of detecting discontinuities which are open to the surfaces of essentially…

The AMIGO instrument is the smallest and lightest ACFM inspection system* available.TSC has taken advantage of its vast wealth of knowledge and experience to make the AMIGO a wieldy, rugged (rated to IP54) instrument that is an ideal tool for site inspections. Specifically designed to function in a wide range of environments the AMIGO has easy-access cabling and large unobstructed buttons which allow the operator to concentrat…

ACFM-7107 is a quadplexer that combines PCS and Cellular duplexers into a single miniature package. Its also features a single antenna connection, eliminating the need for antenna switching. The ACFM-7107 is designed with Avago Technologies' Film Bulk Acoustic Resonator (FBAR) technology. The ACFM-7107 also utilizes Avago's innovative Microcap bonded-wafer, chip scale packaging technology.

The ACPD Crack Microgauge MK IV, for laboratory use, is a rugged instrument with high stability and resolution.It is available with built in multiplexing as an option capable of extension to 128 channels and 4 output currents for monitoring multiple channels.The MK IV can be used with a manual low inductance probe for individual investigations or with an array of fixed or spot welded connections to check on surface or weld toe…

The CGM-7 is a modern microprocessor based instrument for measuring crack depth in metalsundergoing materials testing. Building on the success of the CGM-5R this unit improves upon theCGM-5R specification by offering two channel operation, higher frequency and current outputs, fullcomputer control and a variety of expansion options.It utilises the alternating current potential drop method (ACPD) which is an established techniq…

The DCM-2 is a modern microprocessor based instrument for measuring crack depth in metalsundergoing materials testing. Building on the success of the DCM-1 this unit takes on boardcustomer comments and suggestions, as shown in its impressive features list.It utilises the pulsed current potential drop method (DCPD) which is an established technique alsocovered by the ASTM 647 standard. The technique involves passing a constant…

The FTA Reversing DC Potential Drop System has been designed by Keith Donald to provide the precise current and amplifier stability necessary for the reversing DC potential drop method of monitoring crack size. Custom-manufactured at FTA’s facility, the system is intended to be used in conjunction with the FTA Adwin-Gold Fatigue Crack Growth Rate data acquisition and control testing software, which synchronizes current reversi…

The Digital Barkausen Noise Analyzer - Rollscan 300 - is a fast, easy and reliable way to improve product quality.Rollscan 300 saves on material and labor expensesRollscan 300 is a digital Barkhausen noise analyzer. It is designed for surface quality control and testing of near-surface defects such as grinding burns, involving changes in stress and microstructure in a wide variety of ferritic steel and other ferromagnetic mate…

General purpose sensors are suitable for contact or non-contact testing of flat, concave, convex and irregularly shaped surfaces. Available for all analyzer models.

A range of Magnetic Particle Materials including wet and dry method powders and speciality products.

The FloormapVS2i floor scanner is a computerised MFL system designed to detect, size and map underfloor corrosion on above ground storage tanks. The FloormapVS2i is the best selling magnetic flux leakage (MFL) floor scanner and comes with up-graded magnets to improve corrosion detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains signi…

MPF is a magnetic particle suspension fluid designed for wet method magnetic particle inspection requiring a fluid with a flash point over 200F, low viscosity (less than 5.0cs), no odor, no fluorescence, and no yellow color. MPF has a low sulfur and halogen content.

Application• Non-destructive inspection of carbon steel, copper, brass, cupro-nickel, ferritic and other alloys• For tube inside diameter 0.250 inch (6.35mm) and up• Common usage includes boiler tubes, heat exchanger tubes, and storage tank roofs, floors, walls• Used in power generation, oil and gas, pulp and paper, and petro-chemical plants• Supports T4 + Saturn techniques for finned tubes• Small and large bore applicat…

HD - CR 35 NDT, A film replacement technology, Computed Radiography (CR), is actually a digital radiography technique that uses what we called an Image Plate (IP) made of phosphor material to replace film as the imaging media. Like film the IP comes in various format and sizes and it is also flexible like film. After being exposure to radiation during x-ray or gramma ray inspection, these IPs are being scanned by the CR scanne…

With the SENTINEL™Vision HR Digital Radiography System you get state-of-the art imaging quality in a portable, durable and affordable package. Specifically designed for inspections both in the field and in the lab, SENTINEL™Vision HR is a computed radiography system that uses flexible phosphor imaging plates instead of film to create high resolution images. Its rugged portability makes it ideal to use in field conditions, and…

SENTINEL™ Model 880 Delta, Elite and Omega source projectors are portable, lightweight and compact industrial radiographic exposure devices. The patented device body consists of a titanium ‘S’ tube and cast depleted uranium (DU) shield contained within a 300 series stainless steel tube with stainless steel discs welded at each end forming a cylinder shaped housing. The discs are recessed to provide protection for the rear moun…

The BALTOSPOT Series is comprised of three divisions of directional and panoramic x-ray generators with varying specifications corresponding to different NDT applications, field activities and budgets. The CERAM x-ray generators are pulsed wave units available in maximum capacities of 235 and 300kV. They are directional tubes which contain ceramic tubeheads with a copper external anode and a beryllium window.Features Port…