Materials Products & Reviews

The mass spectrometry-compatible yeast and human protein extracts are designed specifically for mass spectrometry applications.   The extracts are predigested and cleaned up by solid-phase extraction for immediate use in liquid chromatography/mass spectrometry (LC/MS) analysis. Both the yeast and human extracts also are available in an intact undigested form to provide a test material for optimizing mass spec protei…

The GloMax® Explorer System is the newest member of the GloMax® System detection instruments. This multimode reader allows you to get up and running quickly, generating the data you need from your experiments. Simply unpack it, plug it in, and begin your experiments.

A Complete Solution for Monitoring LC and MS Instrument Quality Control and Performance. In combination with an accompanying software tool, the 6 × 5 LC-MS/MS Peptide Reference Mix provides a convenient way to assess LC column performance and MS instrument parameters, including sensitivity and dynamic range. Consists of 30 peptides; 6 sets of 5 isotopologues of the same peptide sequence, differing only in the number o…

Most flexible Multi-mode Microplate Reader for Assay Development

The DMA-80 mercury determination system can analyze any matrix (solid, liquid or gas) without any pre-treatment or chemical additions in as few as 6 minutes in full compliance with EPA method 7473. With thousands of units installed, Milestone defines the benchmark for direct mercury determination a wide range of industries: environmental, food energy, cement, cosmetics, agriculture, mining and petrochemical.

The FLUOstar Omega is a multimode microplate reader perfect for life science research laboratories.

The SPECTROstar Omega microplate reader is a part of the BMG LABTECH’s family of readers that contain a CCD-based spectrometer for ultra-fast, full spectrum absorbance measurements.

The most sensitive microplate reader for high-throughput screening

Absorbance microplate reader from BMG LABTECH

SELECTRA-SIL® Derivatizing Reagents SELECTRA-SIL® is an extensive line of derivatizing reagents manufactured by UCT at its facility in Bristol, PA. Our reagents are designed to increase molecular weight, lower boiling points, and create a more specific ion for compounds intended for gas chromatography and GC/MS. SELECTRA-SIL® Derivatizing Reagents Benefits: Improved chromatographic resolution - increased volatility - red…

The Eppendorf µCuvette G1.0 is a microliter measuring cell, and therefore it is especially suited for measuring high concentrations. The higher the concentration of a sample, the shorter the optical path length should be with which the sample will be measured. Thanks to a special Eppendorf coating procedure, the sample volume is positioned exactly and the drop will be shaped with precision. This technology makes it possible to…

The EXP® Pre-Column Filter is ideal for protecting small-particle UHPLC columns at extreme pressures. Such techniques analyze samples in the most demanding applications, which can decrease the life of these expensive columns. EXP® Pre-Column Filters help extend that life and protect your column investment without sacrificing performance. Free-Turn® architecture allows the user to change cartridges by hand without breaking flui…

The cartridge-based EXP® Analytical Column System is designed for superior chromatographic analysis with each injection rated for routine use up to 20,000 psi.The new EXP® Analytical Column Holders incorporate Free-Turn® architecture allowing the user to quickly exchange columns, by hand, without breaking any fluid connections. The EXP® Analytical Column Holders are available in two formats: In-Line and Direct Connect, allowin…

OPTI-GUARD® 1mm Guard Columns set the standard for extremely low impact, easy to use pre-column protection. Designed for use with analytical (4.6, 3.0 mm i.d.) and narrow-bore (2.1, 1.0 mm i.d.) columns, the patented floating stem design automatically adjusts to any manufacturer's tube stop depth for a zero-dead-volume connection every time. The best part? It's no larger than a standard fitting. Connecting the OPTI-GUARD® requ…

Genius NM32LA Nitrogen Gas Generator for LC/MS applications.

The EVOQ® DART-TQ⁺ is the world's first triple quadrupole MS system specifically designed for DART ion source plug-and-play operation. This innovative system allows for the screening and quantitation of samples with exceptional speed, ultra-high sensitivity, and a reduced environmental impact. If conventional LC-MS workflows are required, you can switch from the integrated DART source to the VIP-HESI source in seconds.

Versatile research-grade AFM for advanced nanoscale surface analysis

C-Slide, cell counting chamber slides

C-Chip 4ch, a precision disposable plastic hemocytometer, is developed to solve the problems of conventional glass hemocytometer.

A precision disposable plastic hemocytometer, developed to solve the problems of conventional Glass hemocytometer.

The NanoRam-1064 is a high-performance handheld Raman Spectrometer for nondestructive identification and verification of incoming raw materials, such as APIs, excipients, and intermediates, regardless of their color.

With the compact NIRS DS2500, near-infrared analysis has taken yet another step into the future of routine analysis. This dedicated analyzer offers exceptional accuracy across a broad wavelength range of 400 to 2500 nm and is designed for routine analysis along the entire production chain. The predispersive Monochromator technology now being utilized in the NIRS DS2500 guarantees a high degree of versatility and stabilit…

The i-Raman® Plus is an enhanced version of our award winning i-Raman portable Raman spectrometer, now powered by our innovative smart spectrometer technologyUsing a high efficiency back-thinned CCD detector with deeper cooling and high dynamic range, this portable Raman spectrometer delivers an improved signal to noise ratio for up to 30 minutes of integration time, making it possible to measure weak Raman signals.The i-Raman…