Gamry Instruments Separations Products & Reviews

The 3000AE is useful for testing multiple cells within a stack or measuring auxiliary voltages.

A high-performance potentiostat suitable for applications in physechem,  coatings, and corrosion.

A full-featured potentiostat for battery testing, fuel cells and supercapacitor testing.

A high-current, high-performance potentiostat/galvanostat/ZRA.

A full-featured potentiostat capable of performing all techniques, including EIS. The new Interface 1010 with built-in temperature monitor using an RTD probe.

A general purpose potentiostat capable of running basic physical and electroanalytical techniques.  The new Interface 1010 series with built-in temperature monitor using an RTD probe.

A research-grade rotator and features the ability to use rotating ring-disk and cylinder electrodes.

A compact potentiostat made with portability and utility in mind.

Reference electrodes are critical to acquiring good electrochemical data and Gamry only provides reference electrodes of the highest quality and stability.

The Dr. Bob's Cell™ is Gamry's smallest electrochemical cell kit, with operational volumes of 1-30 mL. 

The Interface 5000P™ is designed for single-cell testing of batteries, fuel cells or any other energy device.  It can perform charge, discharge, cyclic charge discharge, read cell voltage, self-discharge, and leakage rate.

The MultiPort™ Corrosion Cell is a one-liter electrochemical cell that is designed to maximize flexibility. Its unique two-piece design can accommodate a wide range of sample geometries and makes it easy to clean.

The PTC1™ Paint Test Cell is a low-cost sample cell for electrochemical testing of coated samples.  The PTC1™ can also be used to test bare metal samples using PortHoles™ Electrochemical Sample Masks. 

The Reference 30k™ Booster for the Reference 3000 Potentiostat is an external hardware option which increases the current limit of the Reference 3000/3000AE to ± 30 Amps.

Gamry offers 3 systems UV/VIS, Raman Spectroscopy and Dye Solar Cell Testing.

The H-Cell is a two-compartment electrochemical cell used for membrane testing, H2 permeation, or any other experiment where two separate electrode chambers are required. Both compartments can be separated by an ion-exchange membrane.  Thus, any byproduct generated at the counter electrode does not affect the working electrode's behavior and vice versa.

The IMX8™ Electrochemical Multiplexer is an affordable way to expand the throughput of your lab. Experiments can be sequentially multiplexed on up to 8 channels. The IMX8™ is ideal for corrosion inhibitor testing, EIS evaluation of paints/coatings, monitoring of field probes for corrosion tests, and chemical sensor development.

LPI1010 is designed to accommodate the low impedance of batteries and fuel cells.

Make impedance measurements on up to eight batteries

With jacketed glass cell body & PolyCard Ends 

Kolibrik High-power H2FC potentiostat  

Kolibrik High-power H2FC potentiostat

Kolibrik High-power H2FC potentiostat

Kolibrik High-power H2FC potentiostat

Kolibrik High-power H2FC potentiostat