Electrophysiology > Electrophysiology Accessories & Equipment Products & Reviews

Laboratory Circulators for routine work and standard tasts

The Model P-97 micropipette puller is the latest generation of the Flaming/Brown type puller for fabrication of micropipettes, patch pipettes and microinjection needles. While retaining many of the features on the Model P-87, the P-97 offers improvements in mechanical, electronic and software design. The result is better control of the pulling process and a higher degree of reproducibility. Features: Environmental chamber…

These slice recording chambers are designed to maintain isolated, living tissues in vitro in "interface" mode and allow stable electrophysiological recordings to be made from the preparation. The temperature is controlled by a proportional control heating unit.

Series RC-20 Fast Exchange Open Bath Recording and Imaging Chambers are available in 40µl (RC-24) and 50µl (RC-24E). The bath volume in these two models is the smallest of the open style chambers. This design allows very fast solution exchange for a variety of applications including patch clamp and studies in electrophysiology. The small bath volumes are especially useful when using drugs in small quantities. Both models are u…

The CMA 110 Liquid Switch permits manual switching between up to three perfusion lines (syringes) and a microdialysis probe. This makes it possible to change different solutions instantaneously without any risk of introducing air bubbles into the microdialysis probe. • Instantly switch between syringes • Prevents introduction of air bubbles • No interruption of flow

The PC-10 Puller pulls the glass capillary vertically, using the gravitational force of its own weight. For more versatility, this instrument has two modes: a single pull mode, which pulls at one stretch, and a double pull mode in which the setting is changed in mid-process. The PC-10 can therefore produce long, thin micropipettes for injection purposes, and firm microelectrodes for patch clamping. The change of setting in the…

Magnetic base, arms, manifold and tube holders mount everything securely on your microscope stage for electrophysiology and perfusion. The magnetic base of these different StageHands are designed to stick tightly to a steel ring around your perfusion chamber like our QuickStageTM, or any steel surface nearby. They include a 1⁄4-20 screw to insert into a non-magnetic platform or air table. Footprint: 0.75"" (19 mm), adjustable…

Our flexible Mouse and Rat Stereotaxic Instruments provides users with the ability to perform surgeries on both Mice and Rats on the same base. Digital Stereotaxics offers greater speed of operation and increased accuracy. The digital display helps reduce the risk of human error and increase accuracy (10-rather than 100-micron resolution). The large LED display is also useful for surgeries performed in low light, or constrain…

Chemically resistant, heat sealable flexible tubing Accommodates both 2L and 4L bottles Male MPC connector with cap PureFit® tube clamp system Autoclavable*ADCF - Animal Derived Component Free **MPC - Medical grade Polycarbonate.

These 5/16 x12 inch stainless steel support rods screw into the base of Corning® PC-200/210/220 series hot plate/stirrers.

Corning® magnetic stir bars are Polytetrafluorethylene (PTFE)-coated for increased chemical resistance. Ideal for use with Corning PC-610/620 stirrers.

These 1 x 3/8 inch (2.54 x 0.95cm) Corning® magnetic stir bars are Polytetrafluorethylene (PTFE)-coated for increased chemical resistance. Ideal for use with Corning PC-210/220 and PC-410/420 stirrers.

These 3 x 3/4 inch (7.62 x 1.91cm) Corning® magnetic stir bars are Polytetrafluorethylene (PTFE)-coated for increased chemical resistance. Ideal for use with Corning PC-611 stirrers.

Corning offers a stainless steel, two piece, 18 (0.8cm) diameter that consists of two 9 rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.

This Corning® kit Cat. No. 6795-420KIT includes: Cat. No. 6795-420D, one stirring hot plate Cat. No. 6795PR, external temperature controller Cat. No 440129, vertical support rod. Supplied as two 9 inch (22.9cm) support rods that can be screwed together (18 inches) Cat. No. 6970SR, stir bar retrieverAvailable for purchase separately and not included in the kit: Cat. No. 440140, boss head clamp Cat. No. 440141, holding rod…

This accessory kit is designed for all Corning digital display hot plates and stirring hot plates (Models PC-400D, PC-420D, PC-600D, PC-620D).This Corning® kit Cat. No. 6795KIT includes: Cat. No. 6795PR, external temperature controller Cat. No 440129, vertical support rod. Supplied as two 9 inch (22.9cm) support rods that can be screwed together (18 inches) Cat. No. 6970SR, stir bar retrieverAvailable for purchase separatel…

Cutting edge brain research in awake mice without the biases introduced by anesthetics.

Laboratory Circulators for routine work and standard tasts

A pump system for the cultivation of, e.g. endothelial, cells under flow for simulation of blood vessels. Combine with ibidi Channel slides, such as the µ-Slide I Luer, for cell culture under flow conditions.

Easy setup directly on your microscope: perform live cell imaging in dishes, slides, or multiwell plates. The ibidi Stage Top Incubation Systems fit every standard inverted microscope and include CO 2 and O 2 control as well as actively controlled humidity. They are ideal for all live cell imaging applications and available for single slides and dishes as well as for multiwell plates.

Developed through years of experience with the Flaming/Brown style micropipette pullers and infused with leading edge technology, Sutter is proud to introduce the P-1000 micropipette puller. The most obvious new feature is the color touchscreen display that provides an intuitive and full-featured interface. Key Features: Color touch-screen interface Safe heat mode to protect and extend filament life Line repeat mode sim…

A significant advance in the technology of fabrication of micropipettes, optical fiber probes, and nanospray tips, is offered with the P-2000 micropipette puller. The P-2000 integrates a CO2 laser-based heat source with the technology derived from our extensive experience with conventional pullers. This system offers capabilities unmatched by other pullers. Key Features: Capable of pulling quartz, borosilicate and alumino…

Sutter Instrument Company, in addition to the finest micropipette pullers available, offers a wide selection of high quality capillary glasses in various sizes and materials. Though there are many types and sizes of capillary glass available, we have carefully selected only those that pass our criteria. Our expertise in micropipette technology assures you of precision and high quality. Types of glass available: Borosilica…

The In-Vivo motorised micromanipulator (IVM) was developed to meet the requirements of the most demanding in-vivo applications. High quality materials and precision assembly, along with the super smooth motion and long travel means that the IVM is stable, versatile and low-noise. It’s perfectly suited to electrophysiology and microinjection procedures and is available with single or three axes of motion. Features: • Ultra stab…

Crucial for every experimental setup is a stable mounting system. The Scientifica range of slice platforms, top plates and microscope stages has been developed for researchers using upright or inverted microscopes who would like to move outside the field of view of the objective. Various configurations can achieve this in different ways, either by translating the entire microscope between fixed apparatus, or where laser inputs…