Compact Oil Content Analyzer new OCMA-500 series focuses on enhanced operability and useful functions enabling anyone to handle with no hassle. Offering two models, OCMA-500 series is utilized for various purposes including wastewater monitoring, environmental conservation, and quality control.
A solution for the measurement of turbidity in liquids, the HazeQC ME turbidity measuring module, is provided by Anton Paar as part of a modular measuring system. The approved ratio method with measurement at three angles (transmission 0°, scattered light at 25° and 90°) is used to prevent the influence of particle size on the turbidity value. The measurement is carried out at a wavelength of 650 nm ±30 nm (MEBAK- and EBC-comp…
The FLIR GF620 is the first high-resolution, handheld camera from FLIR to detect methane and other volatile organic compound (VOC) emissions. With its ground-breaking 640 x 480 resolution IR detector, inspectors can check thousands of components and safely scan for gases from greater distances. It's also the first FLIR OGI camera to offer Quantification mode (Q-Mode) for streamlined set-up of the optional QL320 gas quantificat…
Monitoring low levels of formaldehyde in ambient air
SMA MicroPortable® Air Samplers are used for the automated collection of microorganisms in the air. These viable air samplers are battery powered, compact, and lightweight which allows them to be easily moved to desired air sampling points. They also make it easy to start and cancel a sample cycle.
Designed and engineered for geotechnical laboratories to deliver new levels of efficiency in testing procedures. The one-dimensional consolidation test is the most common, and sometimes referred to as the oedometer or incremental loading oedometer test. Radially constrained samples are loaded in a sequence starting with a stress close to the over burden pressure of the sample. The loading is then doubled for each stage;…
Lightweight, highly accurate, portable humidity calibrator
Experience rapid high-resolution imaging, data acquisition, and analysis of microparticles. FlowCam® 5000 flow imaging instrument is an economical, high-value solution for monitoring particles in the 3 μm to 300 μm size range for research, educational, and industrial applications.
Extend your particle imaging capabilities from 300 μm to 5 mm with FlowCam® Macro for aquatic and environmental research and materials characterization. Obtain detailed morphological data along with accurate counting and sizing measurements to enable differentiation of diverse zooplankton species and particle types.
The advantage of ductless on a traditional fume hood structure with lower operating and energy costs.
The Evidence Investigator is a multi-analyte quantitative drug residue screening analyser. Using biochip technology, the Evidence Investigator ensures screening food for drug residues is accurate and efficient, offering laboratories comparable results to that of LC-MS/MS. The Investigator can be used to test a variety of matrices including meat, seafood, honey, milk, mycotoxins and urine. Using multiplex technology, t…
Multi-component calibration gas mixtures in accordance with ISO17025 standards for environmental monitoring.
With Luminescent Dissolved Oxygen (LDO) technology integrated into the Orbisphere 3100, this analyzer is guaranteed to improve process efficiency and provide accurate dissolved oxygen measurements.
The MultiGas ™ 2030 is an FTIR based analyzer capable of ppb to ppm sensitivity for multiple gas species in a variety of applications, such as stack emissions monitoring, process monitoring, ambient air monitoring, purity monitoring, and selective catalytic reduction performance monitoring. It can perform analysis in gas streams that contain up to 40% water, and can simultaneously analyze and display more than 30 gases. With…
Fully automated, Direct read, Discrete analyzer to maximise productivity for routine and special chemistries, up to 200 tests/hour.
The SFM5400 mass flow meter measures mass flows with outstanding accuracy (errors < 1%), long-term stability and repeatability and covers an impressively wide dynamic measurement range. The SFM5400 is made of metal and highly configurable. It is available with a variety of fluidic connections and various interfaces and measures maximum flow rates between 50 sccm and 100 slm. The sensor signal is directly converted into a digit…
The PE-1000 is a global standard model of the oil industry that is registered in ASTM Standard: UOP938-10 (Total Mercury and Mercury Species in Liquid Hydrocarbons). It is the world’s highest level fully-automated measurement equipment for mercury in petroleum.
After decades of experience in precise stack gas measurement, HORIBA's brand new ENDA series represents the ultimate stack gas analyzer.
Measure high levels of SO 2 from a source up to 10,000 ppm with the Thermo Scientific™ Model 43 i -HL SO 2 Analyzer, the first gas analyzer to utilize pulsed fluorescence technology to measure SO 2 .
Serum-free methylcellulose-based medium with recombinant cytokines for human ES and iPS cell-derived cells
TOC analysis of environmental water and wastewater at its best.
Less than 1ppm of CO2 and free of TOC is delivered as required
