Environmental Monitoring and Testing Products & Reviews

Designed to bring seamless harmonisation across microplastics testing, whilst also addressing future regulations.

SS-94000SXES/SS-94040SXSER

The SaphyGATE G by Bertin Technologies is an advanced radiation detection portal designed to monitor truck, train, and cargo loads. It features large-volume plastic detectors for maximum sensitivity and an intelligent algorithm to minimize false alarms.

Automated, fast and accurate NIT analysis for whole grain. It offers standard calibrations for protein, oil, starch and moisture determinations in diverse whole grain including wheat, barley, corn, soybean, canola, rice, oats, rye and triticale.

HORIBA Scientific is supplying its own range of standards as well as SPEX CertPrep standards. In consequence HORIBA Scientific proposes a complete range of Certified Standards Samples specifically for Sulfur in Oil analysis, as well as many other components in all kind of hydrocarbon matrices. The three basic sets are dedicated to the most famous analytical methods of sulfur in oil analysis. The calibration is very simple and…

The SA 9000 series is based on the well-proven flow analysis technique. This principle allows even the most complex analysis to be automated reliably on-line, with excellent correlation with laboratory results.  This model measures the process stream continuously for 1 or 2 parameters simultaneously.

Meter measures Dissolved Oxygen (DO) to determine water quality in a variety of applications including wastewater, aquariums and fish hatcheries. Simultaneously displays DO and temperature readings.Features automatic temperature compensation and calibration to air. Unit holds and recalls minimum and maximum readings. Comes ready to use in a soft carrying case with belt loop, two spare probe heads, electrolyte and 4 AAA batteri…

AstraGuard uses advanced CCD array, fibre optic coupled spectroscopy to continuously monitor organic levels in the treatment of drinking, process and waste water. The UV absorbance of water at 254nm is a reliable indicator of its aromatic organic carbon content; many studies have proven a correlation with the traditional laboratory tests like TOC, BOD, COD and DOC. The ease of implementing UV254 as a continuous monitoring syst…

GDX600 is designed for gas dosing from 0.35 nanoLiters/minute - suitable for aggressive, toxic and combustible gases. In combination with a MFC calibration gases can be prepared from pure gases or gas mixtures down to the ppb range.

GMS500 for preparation of calibration gases - is a PC controlled gas blending system with thermal mass flow controllers - designed for the use of aggressive, toxic and combustibel gases.

GMS500 for preparation of calibration gases - is a low-cost - PC controlled gas blending system with thermal mass flow controllers - not suitable for aggressive gases.

The FIAstar™ 5000 System is used for the automatic wet chemical analysis of nutrients and other parameters in water, soil and wine, as well as in meat or other food products. Single or multiple parameters can be analysed sequentially using just one Analyser module and Plug & Analyse Method Cassettes. The modular system can be expanded for the simultaneous determination of up to three parameters.The Plug & Analyse concept ensur…

Easily analyze your wide-range carbon and sulfur content with our CS844 for the determination of carbon and sulfur in primary steels, ores, finished metals, ceramics, and other inorganic materials using the combustion technique. State-of-the-art hardware and our exclusive Cornerstone® touch-screen software platform provide your laboratory with increased usability and a lower cost-per-analysis. Additional features — such as…

The standard MAX 40 anemometer has proven to be a rugged, reliable and highly accurate anemometer. Professional quality at a minimum price. Its low moment of inertia and unique bearings permit very rapid response to gusts and lulls. The unique bearing system is self-lubricating and moisture or dirt will not destroy the bearings or degrade the performance (self cleaning). Moreover the anemometer is highly resistant to icing, ev…

The RSA is a rain sensor with a processor controlled relay contact and surface temperature control and is ideal for climate control systems such as sun blinds and greenhouse automation.For even better climate control we have the programmable sensor RSA-P. This reliable rain sensor can be programmed en read out on PC by the user.

Rain gauge with 200 cm² circular collecting area (WMO standard), made of stainless steel. The instrument consists of: 1 upper part with limiter ring, 1 lower part, 1 collecting can, 1 holder, 1 precipitation measuring vessel DIN 58667B, 0-10 mm, scaled in 1/10 mm precipitation height.

RA01 is a 2-component radiation sensor that is used for scientific-grade energy balance studies. The instrument has separate measurements of solar (Short Wave or SW) and Far Infra-Red (Long Wave or LW) radiation. Combined with estimates of SW solar albedo- and of surface temperature, this instrument can also be used for estimation of net-radiation. The advantage in this approach are reduction of costs and independence from loc…

Features Easy to read display Integral or interchangable probe Tried-and-tested housing With AirChip3000-technologyThe HygroPalm2-series is the latest development in handheld measuring instruments for relative humidity, temperature and dew point. Based on AirChip3000 technology, this indicator achieves a degree of accuracy not seen before.In combination with advances in sensor technology and integration, the HygroP…

Known worldwide for its consistent reliability and outstanding performance (±0.05% FS accuracy), the Model 270 has been used in applications such as Weather Monitoring, Avionics Systems, and Crucial Compensation of Barometric Pressure in Laser Interferometers.

Sensor for indoor and outdoor light intensity measurements. The sensor uses a silicon photovoltaic cell and is sensitive for wavelengths between 400 and 1100 nm.

The Spectroquant® analysis system includes photometers with cell tests and reagent tests which can be identified by barcodes pre-diluted standard solutions in various concentrations for increased reliability requirements residue-free cleaning agents Three-stage concept for internal controls Photometer Check - AQA 1 Easy to perform with certified color standards and/or Certipur® UV/VIS standards. System Check - AQA 2 R…

The Thermo Scientific Developmental Neurotoxicity Panel is the only proven method for analyzing the effect of industrial chemicals on neuronal morphological chemicals in food, consumer products and the environment. The widespread use of these chemicals has led to fears of a link between exposure to such chemicals and the increased incidence of neurological disorders in children. The assay uses Neuroscreen (NS-1) cells, a subcl…

Environmental Monitoring Software Program Environmental Monitoring Program is an application capable of capturing all environmental data in a 21 CFR Part 11 Compliant, fully validated system. It is envisioned for sterile and non sterile health care industries (Pharmaceuticals, Biotech, Chemical, microbiological) food and any other sterile environment based on the latest guidelines from, FDA, EU, ISO 14644-1 and PDA Technical…

The 8000M Mixer/Mill® is a high-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples. Grinding and mixing vials are available in: hardened steel, stainless steel, tungsten carbide, alumina ceramic, zirconia ceramic, silicon nitride, agate, polystyrene, methacrylate, and polycarbonate. Applications include: Mechanical alloying, slurry grinding, blending powd…