Labware
High-Purity Acids, Always fresh to hand thanks to Subboiling. As rule, chemical prices increase exponentially as the chemical’s purity increases. Therefore, even where annual consumption is apparently minimal, high-purity acids can quickly become a significant cost factor for trace analysis laboratories. These costs can be avoided by the employment of a subboiling apparatus to produce high-purity acids from more economical…
Part Numbers:1801-00: pierceable silicone square well sealing mat suitable for heat sealing
• DNase, RNase and DNA free pestles.• To homogenize cells or resuspend precipitates such as protein or DNA pellets.Part Numbers:1004-39: pestle for 0.5 ml tubes1005-39: pestle for 1.5 ml tubesAssorted colors available
This 5 mL PYREX® receiver is used to determine the amount of dilution in crankcase oils when gasoline has been used as fuel. It is designed to allow heat-sensitive materials to be kept away from the hot base of the flask and has an outer 24/40 Standard Taper joint at the top and an inner 24/40 Standard Taper joint on the sidearm. Reference: ASTM D-322.
This is a clamp for the 25 mL Erlenmeyer flask, for use with Corning® LSE™ Orbital Shaker and Corning® LSE™ Low Speed Orbital Shaker.
This is a clamp for the 50 mL Erlenmeyer flask, for use with Corning® LSE™ Orbital Shaker and Corning® LSE™ Low Speed Orbital Shaker.
This is a clamp for the 125 mL Erlenmeyer flask, for use with Corning® LSE™ Orbital Shaker and Corning® LSE™ Low Speed Orbital Shaker.
This is a clamp for the 250 mL Erlenmeyer flask, for use with Corning® LSE™ Orbital Shaker and Corning® LSE™ Low Speed Orbital Shaker.
This is a clamp for the 500 mL Erlenmeyer flask, for use with Corning® LSE™ Orbital Shaker and Corning® LSE™ Low Speed Orbital Shaker.
This is a clamp for the 1L Erlenmeyer flask, for use with Corning® LSE™ Orbital Shaker and Corning® LSE™ Low Speed Orbital Shaker.
The Corning® polytetrafluoroethylene faced silicone septa fit into open top PBT caps (No. 1395-25HTSC) with GL25 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
The Corning® orange polypropylene caps are autoclavable at 121°C, have a GL32 thread and use a linerless plug seal design for efficient sealing.
The Corning® polytetrafluoroethylene faced silicone septa fit into open top PBT caps (No. 1395-32HTSC) with GL32 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
The Corning® orange polypropylene caps are autoclavable at 121°C, have a GL45 thread and use a linerless plug seal design for efficient sealing.
The Corning® silicone septa fit into open top PBT caps (No. 1395-45HTSC) with GL45 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
The Corning® polytetrafluoroethylene faced silicone septa fit into open top PBT caps (No. 1395-45HTSC) with GL45 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
These 19L (5 gallon) PYREX® solution bottles are similar in shape to a carboy. Designed for storage of solutions and are ideal for media preparation Weight controlled to 15 lbs. maximum for ease of handling Suitable for storing distilled water and standard solutions Will withstand hot air (dry) or steam (wet) sterilization. Necks are tooled to increase mechanical strength and for uniform stopper fit. Takes a No. 12 rubbe…
The standard taper stopper incorporates a plain tip tube as the distributor. These bottles have a large hexagonal base for stability. Tubulations are 18 mm O.D.
The standard taper stopper incorporates a plain tip tube as the distributor. These bottles have a large hexagonal base for stability. Tubulations are 18 mm O.D.
The standard taper stopper incorporates a plain tip tube as the distributor. These bottles have a large hexagonal base for stability. Tubulations are 18 mm O.D.
These PYREX® bulbs are for the absorption of CO2 in carbon determination. Weight, when filled, is approximately 135 grams. A turn of the interchangeable stopper closes both inlet and outlet tubes which have 6mm O.D.
These are replacement Polytetrafluorethylene (PTFE) locking stopcocks for the PYREX® 25 mL and 50 mL Economy Grade Burets (Nos. 2116-25 and 2116-50).
Reservoir at top with product standard 2 mm bore PTFE plug.
Reservoir at top with product standard 2 mm bore PTFE plug.
