Drug discovery > Target Discovery Products & Reviews

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges. Dimensions: 82.6 by…

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

Expand your analytical capabilities

Uncover deep biological understanding in your everyday assays and innovative applications using the Operetta CLS™ high-content analysis system. Featuring a unique combination of technologies, the system delivers all the speed, sensitivity and resolution you need to reveal fine sub-cellular details. And with our simple, powerful Harmony software, Operetta CLS™ lets you find even subtle phenotypic changes.

FG beads® are beads approximately 0.2 μm in diameter that are composed of multiple ferrite particles coated with a special polymer called poly-GMA (glycidyl methacrylate). The FG beads® that are manufactured using this original technology are used as matrices for affinity purification and provide characteristics that are superior to conventional matrices.

FG beads® are beads approximately 0.2 μm in diameter that are composed of multiple ferrite particles coated with a special polymer called poly-GMA (glycidyl methacrylate). The FG beads® that are manufactured using this original technology are used as matrices for affinity purification and provide characteristics that are superior to conventional matrices.

FG beads® are beads approximately 0.2 μm in diameter that are composed of multiple ferrite particles coated with a special polymer called poly-GMA (glycidyl methacrylate). The FG beads® that are manufactured using this original technology are used as matrices for affinity purification and provide characteristics that are superior to conventional matrices.

FG beads® are beads approximately 0.2 μm in diameter that are composed of multiple ferrite particles coated with a special polymer called poly-GMA (glycidyl methacrylate). The FG beads® that are manufactured using this original technology are used as matrices for affinity purification and provide characteristics that are superior to conventional matrices.

FG beads® are beads approximately 0.2 μm in diameter that are composed of multiple ferrite particles coated with a special polymer called poly-GMA (glycidyl methacrylate). The FG beads® that are manufactured using this original technology are used as matrices for affinity purification and provide characteristics that are superior to conventional matrices.

FG beads® are beads approximately 0.2 μm in diameter that are composed of multiple ferrite particles coated with a special polymer called poly-GMA (glycidyl methacrylate). The FG beads® that are manufactured using this original technology are used as matrices for affinity purification and provide characteristics that are superior to conventional matrices.

Our magnet stands are used for magnetic separation of the nano magnetic particles. Please choose the product in accordance with the operation to liquid volume.

FF beads are magnetically separable fluorescent beads, incorporating a fluorescent dye into conventional FG beads.

FS beads are nonmagnetic fluorescent beads, incorporating a fluorescent dye into conventional FG beads.

Made of non-treated, medical-grade virgin polypropylene, Biotix 96-Well plates conform to the ANSI/SBS 1-2004 standard for automated high throughput processing.

Biotix 96 and 384-Well Microplates are made of non-treated, medical-grade virgin polypropylene and conform to SBS standards for automated high throughput processing and compound storage.

no L-Glutamine

No L-Glutamine

High glucose, with glutamine

No L-Glutamine, no Sodium Pyruvate

with L-Glutamine