Materials Products & Reviews

  Agilent now treats each premium 11mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point with every injection.

Prevent unknown peaks from impacting your results   Agilent MS Analyzed Vial Kits end the need to pre-test or to rerun samples due to unexpected peaks. Eliminating vials as a source of contamination translates into confidence that your results are accurate and reliable. All MS Analyzed Vials Kits include a Certificate of Analysis that contains true lot-specific and fully traceable LC/MS and GC/MS signal traces as well as criti…

Bleed and Temperature Optimized Non-Stick Septa (BTO)   Agilent now treats each premium 11 mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point with every injection.

Oxygen/moisture adsorbents team up to give you two functionalities in the same trap. Unlike some oxygen/moisture traps, these traps are disposable. Consider the safety, performance, and cost advantages of the Agilent capillary grade oxygen/ moisture traps (0T3) when comparing to heated, catalytic traps. The Agilent OT3 Trap contains a highly active, metal-containing, scrubbing material in an inert, aluminum body. This materi…

Find supplies for the following Teledyne Tekmar purge and trap instrumentation

Agilent's QuickSwap Capillary Flow Technology module and pre-swaged fused silica tubing restrictors can increase the productivity of your Agilent 5973N and 5975 inert MSD systems, allowing you to change columns without venting the MSD. QuickSwap not included.

SilTite (Metal) Ferrules     Agilent offers a comprehensive selection of ferrules made of different materials and configurations for a a leak-free connection between the column and injector. SilTite ferrules are used with Agilent Ultimate Union and other Capillary Flow Technology products, including the Purged Effluent Splitter (G3180B), Deans Switch device (G2855B), and QuickSwap Mass Spec Interface (G3185B).  

Even small leaks in the split/splitless injection port can reduce system sensitivity, cause poor signal to noise ration, increase column bleed, and even shorten column lifetime. Using a patent pending manufacturing process, our inlet gold seals eliminate tiny leaks from machining that can negatively impact your GC performance.

The Cary 5000 is a high-performance UV-Vis and NIR spectrophotometer with superb photometric performance in the 175–3300 nm range. Using a PbSmart detector, the Cary 5000 extends its NIR range to 3300 nm making it a powerful tool for materials science research. The Cary WinUV software, a modular Windows-based software, makes it easy to perform powerful analysis and control a number of optional accessories.

Agilent has discontinued the Cary 300 UV-Vis.

Cary WinUV dissolution software supports both Agilent multicell and fiber optic online UV dissolution systems. The software generates accurate and reliable data and accommodates a wide variety of dissolution samples and methods. Analysts can easily customize final reports with a complete summary of the data acquisition using comparison and statistical evaluation tools, data tables and dissolution profiles.

The Agilent C15 Component Leak Detector is a modular leak-testing package intended for applications in which the leak detector components are integrated into the system. It incorporates Agilent's Contra-Flow vacuum design, which maximizes the protection of its components from contamination in industrial applications. An optional color touch screen display is available for remotely showing all system status information and i…

The PHD-4 sniffer leak detector is a lightweight and rugged sniffer, sensitive to helium concentrations as low as 2 ppm – equivalent to a leak rate of 5 x 10–6 atm-cc/sec, far superior to bubble-testing, dye penetrants, and pressure decay. The sensitivity of the PHD-4 is enabled by Agilent’s proprietary and patented SIPD (Selective Ion Pump Detection) technology. With automatic startup, self-test and calibration, the PHD-4…

The worlds fastest and most sensitive CCD detector           The Eos CCD is the fastest and most sensitive CCD detector for X-ray diffraction from Agilent or any manufacturer. With an active area of 92 mm diagonal and a gain of 330 e-/X-ray (Mo) the Eos is the highest sensitivity CCD detector available today. It is ideal for the most challenging experiments in small molecule crystallography, providing data collections faster…

Agilent CrossLab is a growing portfolio of GC supplies manufactured to perform seamlessly with the non-Agilent GCs in your lab. From autosampler syringes to autosampler vials, Ultra Inert inlet liners to non-stick liner O-rings, capillary column ferrules to column nuts, vials, caps, septa, and more. Experience the same Agilent quality solutions you know and trust, now for your non-Agilent GCs: PerkinElmer GC Systems…

Agilent Deconvolution Reporting Software (DRS) for GC/MS is an application for target compound analyses that combines results from the Agilent MSD Productivity ChemStation, the NIST Automated Mass Spectral Deconvolution and Identification Software (AMDIS), and the NIST 2008 Mass Spectral Search Program (NIST08) into one easy-to-read report. 

The Agilent 55B AA is ideal for any laboratory requiring an entry level AA system with advanced capabilities. The double-beam 55B AA features an LCD screen and dedicated keyboard for simple, stand-alone operation. The 55B AA combines rugged, reliable hardware with an integrated software interface for fast, easy operation.

The Agilent Cary 630 FTIR is a flexible benchtop FTIR spectrometer offering high performance and extraordinary ease-of-use in an ultra-compact design. It is engineered with the user in focus and provides simple, intuitive workflows to deliver meaningful answers in routine FTIR analysis and cutting-edge research.

The Agilent 5500 compact FTIR spectrometer is designed as an at-side FTIR analyzer to provide you with great results, rapidly and reliably, day after day. The combination of great performing optics, innovative sampling interfaces, and intuitive software provides information on liquid and solid samples faster and easier than ever before.

The 1260 Infinity II GPC/SEC System is designed to meet the challenges faced by today’s polymer analysis. This versatile size exclusion chromatography (SEC) and gel permeation chromatography (GPC) system provides accuracy and high performance.

The 1260 Infinity II High-Temperature GPC System can provide information about all of today’s engineering polymers such as polyolefins, which are one of the most popular polymers with numerous applications. This level of detail helps with development and to predict how a given batch will process and perform in the final product.

The Agilent Cary Eclipse fluorescence spectrophotometer is sensitive, accurate, and flexible. It can measure fluorescence, phosphorescence, chemiluminescence, and bioluminescence. Accessories include temperature control and solid sample handling, automatic polarizers and a microplate reader for high sample throughput.

Agilent has discontinued the Cary 100 UV-Visible Spectrophotometer

The Cary 6000i UV-Vis-NIR spectrophotometer has been tailored for unmatched photometric performance in the short-wave infrared (SWIR) 800–1800 nm range as well as the UV-visible 175 to 800 nm. Using narrow-band InGaAs detection and a 600 lines-per-mm diffaction grating for improved SWIR sensivity, the Cary 6000i is the ultimate tool for materials characterization spectroscopy.  

Agilent ® J&W™ DB-5ms and HP-5ms Ultra Inert deliver industry-leading analytical performance in a range of chromatographic applications. Very low bleed characteristics and excellent signal-to-noise ratio and peak shapes, enables high levels of performance in analyzing challenging active analytes. DB-5ms  and HP-5ms Ultra Inert are also individually tested with a demanding Ultra Inert test probe mixture, to deliver consistent…