Materials Products & Reviews

Agilent J&W Ultra 1 is a 100% dimethylpolysiloxane, nonpolar column that resembles HP-1 but with tighter specifications for retention index and capacity factors. Agilent J&W Ultra 2 is a (5%-phenyl)-methylpolysiloxane, nonpolar column and resembles HP-5 but with tighter specifications for retention index and capacity factors. 

Agilent J&W DB-35 columns are ideal for conformational analysis. The DB-35 is a (35%-phenyl)-methylpolysiloxane, mid-polarity column with low bleed. 

Agilent J&W DB-1 is non-polar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications. 

Agilent J&W HP-5ms Semivolatile columns are specifically tested for inertness for active compounds, including acidic and basic compounds. With an effective operating temperature range of -60 to 325/350 ºC, these nonpolar columns offer industry-leading levels of sensitivity and analysis integrity. All columns are tested to Agilent's demanding QC industry standards and are bonded, cross-linked and solvent rinsable.

Agilent J&W DB-Dioxin columns are specifically engineered for the analysis of polychlorinated dibenzodioxins (PCDD) and dibenzofurans (PCDF). The column resolves 2,3,7,8-TCDD and 2,3,7,8-TCDF from all other isomers in one run.

Total petroleum hydrocarbon analysis is a routine technique in many environmental laboratories, with many samples needing to be screened. A simple and reliable method is required that provides the shortest analysis time. 

Agilent J&W DB-VRX features unique selectivity, engineered for optimum resolution of volatiles. The low-polarity DB-VRX columns deliver excellent peak shapes and are fully compliant with U.S. EPA methods 502.2, 524.2, and 8260.

Agilent J&W DB-624 is recommended for EPA methods 502.2 and 8021, as well as for fast GC/MS volatiles analysis. It is specifically designed for the analysis of volatile priority pollutants and residual solvents.

Agilent J&W CP-Select CB for MTBE provides guaranteed analysis of MTBE in reformulated gasolines, with reproducible results. It has unique selectivity for ease-of-use with MTBE. The column's broad dynamic range for MTBE quantification delivers the highest productivity for increasingly demanding volatiles applications. 

Introduce volatile compounds from virtually any sample matrix into your GC or GC/MS. Automatic Leak Check, Priority Sample Positions, and Barometric Pressure Compensation improve uptime and efficiency.

Comprehensive solutions for biodiesel, biogas, and fuel ethanol analysis that conform to ASTM and EN standards. Factory configuration and testing allows fast installation so you can start running your biofuel samples quickly.

Dependable leak-free capillary connections allow reliable backflush, split flow, heart-cutting, and GC x GC on Agilent 8890 and 7890 GC systems. These devices are low thermal mass, oven mountable, and inert.

Increase productivity in your GC and GC/MS lab with high throughput and automated sample preparation capabilities The high-end PAL3 autosampler offers three types of injection techniques: liquid injection, headspace, and solid phase microextraction (SPME).

Refinery gas analyzers are an integral part of any refinery lab and provide valuable information that allow refiners to monitor and optimize catalytic and other processes, establish market value of a gas when sold to the chemical industry, and enable the study of gaseous products from process under study or development.

GC/MS methods are widely used for forensic toxicology, especially for the screening of large numbers of target compounds in complex matrices. Full-scan EI methods offer many advantages for broad-range screening, such as an unlimited number of targets, full-spectrum identity confirmation, and library searching for identification of non-targets. Technologies such as Capillary Flow Technology backflushing, Deconvolution Reporting…

Monitor greenhouse gas emissions with analyzers preconfigured to adhere to regulatory (EPA, EN) standards.

Based on the Agilent 990 Micro GC, this Natural Gas Analyzer offers fast analyses with with easy-to-use software and the ability to calculate all required physical properties.

Based on the Agilent 990 Micro GC, this portable four channel, multi-dimensional Refinery Gas Analyzer works in remote environments with complete operational simplicity. It is optimized for specific RGA analytes, with a total analysis cycle time of less than three minutes.

These factory-tested, ready-to-use GC analyzers measure impurities in ethylene and propylene samples using FPD, FID, PDHID, and MS detectors.

Agilent Reformulated Fuel Analyzers can be used for analysis of various oxygenates, benzene, and heavier aromatics. Multiple methods on a single instrument provide flexibility and cost-efficiency.

Based on the 7890 GC and 5977A Series Single Quadrupole Mass Spectrometer, the GC/MS PAH Analyzer is suitable for analyzing poly-cyclic aromatic hydrocarbons in environmental and food samples. 

200A pore size;  available in 2.0, 4.6, 10and 21.2  mm ids, and lengths from 50 - 250 mm. Pursuit columns are ideal for pharmaceutical applications using LC/MS, from analyzing lead compounds and biological samples in drug discovery, to implementing dependable analysis of raw materials and approved drugs in the QC process.  Build on the large 200A pore size silica, high liquid density delivers up to 40% faster separations witho…

Agilent Mass Profiler Professional (MPP) software is a powerful chemometrics platform designed to exploit the high information content of MS data and can be used in any MS-based differential analysis to determine relationships among two or more sample groups and variables. 

The Agilent MassHunter METLIN Metabolomics Database and Library enable streamlined metabolite identification to facilitate understanding of global metabolic changes that can occur in a biological system. Available as a comprehensive database of metabolites (PCD) that optionally includes MS/MS spectra (PCDL).

Agilent now treats each premium 11mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point with every injection.