Food and beverage testing is a critical scientific practice that ensures food safety, food quality, and compliance of food and drink products. Through comprehensive analysis, food testing labs assess factors such as microbiological contamination, chemical residues, nutritional content, and authenticity. By adhering to strict regulatory standards and industry guidelines, food and beverage testing helps maintain product integrity, fight food fraud, prevent foodborne illnesses, and meet consumer expectations for safety and transparency. Explore how food and beverage testing labs play a pivotal role in safeguarding public health and promoting trust in the global food supply chain.
33mm threaded cap Vented cap has 37mm diameter filter with a nonwettable (hydrophobic) glass fiber filter Allows gas exchange while minimizing the risk of contamination Filter connected to cap with 1/4 " (6.4mm) ID chemically resistant, heat sealable flexible tubing Sterilized by gamma irradiation
E-Cube™ Fittings Kit contains: 3/16 inch Norprene™ Pump tubing (18 inches) Tubing ratchet clamps (6ea) Barbed T-fittings (2ea) Barbed Reducing Connector (1ea) 4 inch Wire ties (20ea) Barbed Y-connector (1ea) Barbed 50mm PTFE syringe filters (2ea) Male barbed luer fittings (5ea) Female barbed luer fittings (5ea) Male luer plugs (2ea) Interlink injection sites (2ea) Blunt plastic cannulas (1 sleeve) 1.0 inch I.D. x…
25cm2 available growth area Manufactured from optically clear virgin polystyrene Treated with a Corning® CellBIND® surface treatment for enhanced cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic
(This is suggested replacement for 3001.) 225cm2 available growth area Manufactured from optically clear virgin polystyrene Treated for optimal cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic
150cm2 available growth area Manufactured from optically clear virgin polystyrene Treated with a Corning® CellBIND® surface treatment for enhanced cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic
Manufactured from optically clear virgin polystyrene Treated with a Corning® CellBIND® surface treatment for enhanced cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic
225cm2 available growth area Manufactured from optically clear virgin polystyrene Treated with a Corning® CellBIND® surface treatment for enhanced cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic
Approximate growth surface area is 21cm2 Actual inside growth surface diameter is 52.1mm Height is 15mm Manufactured from optically-clear virgin polystyrene Corning® CellBIND® surface treated for optimal cell attachment Sterilized by gamma radiation and nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange
Approximate growth surface area is 55 cm2 Actual inside growth surface diameter is 83.8mm Height is 20mm Manufactured from optically-clear virgin polystyrene Corning® CellBIND® surface treated for optimal cell attachment Sterilized by gamma radiation and nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange
The CellCube Module is an integral, encapsulated, sterile, single-use device that is 100% pressure-hold tested before shipment. It is comprised of a series of parallel, styrene plates joined to create thin, sealed, laminar flow spaces between adjacent plates. Each culture plate receives proprietary tissue culture treatment prior to assembly to ensure dense, uniform cell growth.These CellCube Modules provide: a series of paral…
Overcaps made from polyethylene Filter adapter caps have peel-away covers for inserting barbed disc filters for sterile venting with 0.2 µm membrane Sterlized by gamma irradiation Solid red overcap is used in closed systems or applications where venting is not necessary
33mm polyethylene threaded cap Male MPC End Cap with a 1/4"(6.4mm) ID Female MPC Coupling Sterilized by gamma irradiation
33mm polyethylene threaded cap Male MPC End Cap with a 3/8" (9.5mm) ID Female MPC Coupling Sterilized by gamma irradiation
A stacking device models the top surface of the CellSTACK® chamber, securely nesting in the strengthening ribs. It is used to optimize incubator space while providing clearance for venting
33mm polyethylene threaded cap Has 1/4 chemically resistant, heat sealable flexible tubing Sterilized by gamma irradiation
33mm polyethylene threaded cap Female MPC End Cap with a 1/4
33mm polyethylene threaded cap Female MPC End Cap with a 3/8"" (9.5mm) ID Male MPC Coupling Sterilized by gamma irradiation
These disposable Corning® Spinner Flask Aseptic Transfer Caps will both reduce contamination and enhance the productivity of your cell culture operations when adding or removing medium and cells. Aseptic Transfer Caps are sterile (10⁻⁶ SAL), individually double bagged and fit the side arms on 500 mL Corning® Disposable Spinner Flasks (Cat. No. 3153).Cap is made of high density polyethylene; autoclaving is not recommended.The v…
The Corning 1L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Recommended working range of 300 mL to 1L. Extended paddle design ensures constant top-to-bottom motion of the liquid without having to adjust the height of the paddle. Bottom contours on the paddle hug the shape of th…
The Corning 3L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Recommended working range of 1L to 3L. Extended paddle design ensures constant top-to-bottom motion of the liquid without having to adjust the height of the paddle. Bottom contours on the paddle hug the shape of the fl…
The Corning 1L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Recommended working range of 300 mL to 1L. Extended paddle design ensures constant top-to-bottom motion of the liquid without having to adjust the height of the paddle. Bottom contours on the paddle hug the shape of th…
These disposable Corning® Spinner Flask Aseptic Transfer Caps will both reduce contamination and enhance the productivity of your cell culture operations when adding or removing medium and cells. Aseptic Transfer Caps are sterile (10⁻⁶ SAL), individually double bagged and fit the side arms on 1L Corning® Disposable Spinner Flasks (Cat. No. 3561).Cap is made of high density polyethylene; autoclaving is not recommended.The venti…
The Corning 3L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Recommended working range of 1L to 3L. Extended paddle design ensures constant top-to-bottom motion of the liquid without having to adjust the height of the paddle. Bottom contours on the paddle hug the shape of the fl…
These disposable Corning® Spinner Flask Aseptic Transfer Caps will both reduce contamination and enhance the productivity of your cell culture operations when adding or removing medium and cells. Aseptic Transfer Caps are sterile (10⁻⁶ SAL), individually double bagged and fit the side arms on 3L Corning® Disposable Spinner Flasks (Cat. No. 3563).Cap is made of high density polyethylene; autoclaving is not recommended.The venti…
These disposable Corning® Spinner Flask Aseptic Transfer Caps will both reduce contamination and enhance the productivity of your cell culture operations when adding or removing medium and cells. Aseptic Transfer Caps are sterile (10⁻⁶ SAL), individually double bagged and fit the side arms on 500 mL Corning® Disposable Spinner Flasks (Cat. No. 3153). Cap is made of high density polyethylene; autoclaving is not recommended. T…
![Corning® Filter Adapter Caps [2] and Solid Overcap [1] for Corning® Universal Caps - Corning Life Sciences - Life Sciences](https://cdn.sanity.io/images/f5b6mtfn/selectscience-staging/4d5205334cf8869e5e0b1fb7526f6e58e6d48fb8-1200x900.jpg?w=3840&q=75&fit=clip&auto=format)
