Cannabis Testing Products & Reviews

CoulArray® - The Only Coulometric Array Detector for HPLC ESA's pioneering electrochemical technology has made possible the multi-sensor detector for HPLC. Measure multiple analytes simultaneously, including those that are chromatographically unresolved. Only ESA's unique coulometric array detection provides: Sensitivity to femtomole levels 3D resolution of co-eluting peaks Qualitative characterization of peaks Simpl…

Coulometric Electrochemical Cells- The Key to Enhanced Selectivity Coulochem cells are unique in their design, employing the patented ESA flow-through porous graphite electrode. These low-volume analytical cells contain two working electrodes. The high surface area of each electrode results in 100% reaction of the electroactive compound. The first (screening) electrode can be used to eliminate potentially interfering com…

These Corning® syringe filters have acrylic copolymer housings, female Luer lock inlets and male Luer slip outlets. Surfactant-free cellulose acetate (SFCA) membranes provide the lowest protein binding 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards

Two Autogizer Models• Model 700 includes five Model 200 homogenizers(1/5 hp 5,000 to 30,000 rpm) • Model 701 includes four Model 250 homogenizers(3/4 hp 10,000 to 30,000 rpm)Also available with 1 to 5 sonic probes. Flexibility• Can run individual tubes or full racks Fully Programmable Row by Rowwith multiple operator set programs• Up and Down Cycling with height settings• Rate of Cycling• Timing of Cycling Advanced Cutter…

MB35 The affordable moisture analyzerThe MB35 gives you the accuracy and reliability you need for moisture determination. Capacity: 35g Readability: 0.005gMB45 Superior accuracy and performanceThe MB45 combines state-of-the-art moisture analysis with user friendly software, graphic display, and enhanced heating options. Capacity: 45g Readability: 0.001g

Ready-to-use dialysis device with a broad built-in range of precise MWCO's and all the needed accessory components built in for ultimate convenience.  Features leak proof and re-sealable snap-on cap for sampling, colour coded dot for MWCO, broad floatation disk for buoyancy, 6 volume-specific size, 2 membrane types- biotech grade regenerated cellulose (RC) and biotech grade cellulose ester (CE).

This extremely low drift and ultra low noise conductivity detector, may be purchased separately

The new Cecil DC, scanning DC and pulsed amperometric electrochemical detector

Extremely accurate refractometer for gases and anaesthetic gas mixtures

The NEW Finnigan TSQ Quantum Discovery MAX: Extraordinary Value The high-performance, ultra compact benchtop Finnigan TSQ Quantum Discovery MAX incorporates innovative new technology for increased sensitivity, precision, ruggedness, and reliability. It is principally designed for high-productivity environments such as environmental, clinical and drug discovery laboratories. With the Ion Max source, the Finnigan TSQ Quantum Di…

Two new additions to the SNAP CAP™ range. These caps are pre-cut to avoid any vacuum generation problems.

This competitively-priced, single-channel dissolved oxygen meter is easy to set up and use while providing reliable, accurate DO measurement for water analysis and general laboratory applications. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features.  It offers enhanced stability indicators, salinity correction and automatic barometric pressure compensation—…

This waterproof, battery-operated DO meter stands up to the most demanding water analysis applications and delivers over 2,000 hours of continuous operation.  Convenient Quick-Start Guide is located on the back of the meter to make the unit easy to operate in the field. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features. It offers enhanced stability indica…

This waterproof, battery-operated pH/DO meter stands up to the most demanding water analysis applications and delivers over 2,000 hours of continuous operation. Convenient Quick-Start Guide is located on the back of the meter to make the unit easy to operate in the field.  The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features—including available 21 CFR Part 11…

Biochemical oxygen demand (BOD) determination is still one of the most important parameters in water resource management. It can be used to evaluate the impact of biodegradable substances in waters and waster water. With its OxiTop ® systems, WTW offers a unique, modular and mercury-free instrument system. It is not only suitable for BOD determination, but also for measuring biodegradability and deple-tion.The advantages of Ox…

Complete packages for 6 or 12 simultaneous measurementsMeasurement using OxiTop ® is based on pressure measurement in a closed system: microorganisms in the sample consume the oxy-gen and form CO 2 . This is absorbed by NaOH, creating a vacuum which can be read directly as a measured value in mg/l BOD.The used sample volume regulates the amount of oxygen available for a complete BOD. Measurement ranges of up to 4,000 mg/l can…

Complete package for 6 or 12 simultaneous measurements – For a larger number of samples and with simple sample measurement OxiTop ® Control is the logical further development of the successful OxiTop ® system using software-controlled functions and infrared interface to communicate with a handy controller, the OC 100. This system enables the simultaneous and grouped start, management, storage and tracking of 100 measuring head…

common featuresSimultaneous sample management with option of grouping up to 100 OxiTop ® -C measuring heads.Data call-up of one parallel sample with statistical evaluation and as individual data.Automatic calculation and graphical display of BOD value.Data transfer even through glass doors.Protocol and documentation of data via Achat OC commu-nication program in combination with a PCGLP and AQS with inspection intervals for ca…

Instead of the display and keys, the OxiTop ® -C measuring head has an infrared interface with which it communicates with Controller OC 100 or OC 110. By "e;pointing"e; the controller at an OxiTop ® -C measuring head it can be identified and started, data can be called up or deleted and sampling progress can be displayed.Each measuring head has its own identification number; this means that manual identification of samples is…

Stirrers IS 6 and IS 12 have been specially developed for BOD measurement with the OxiTop ® system. Software-controlled speed regulation prevents the magnetic stirrer bar from getting caught or wobbling. The speed is selected so that an optimal gas exchange with the sample takes place. The stirrer is maintenance-free and non-wearing as it contains no moving parts. The IS 6-Var model has been specially developed for use wit…

Determination of anaerobic degradation processes: biogas determinationAnaerobic degradation processes take place in the absence of oxygen. In order to be able to fill the gas space above the sample with inert gas the measuring bottle has a septum sealed nozzle. When anaerobic degradation has taken place the dissolved CO 2 can be driven off and then removed from the gas space by means of a CO 2 absorber. The resulting pressure…

Microbiological growth and stress investigations: determination of the respiration rate (aerobic/anaerobic measuring operation)The use of special measuring bottles with a septum sealed nozzle allows the inter-ference-free addition of substrates and solutions. Pressure alterations could indicate a reduction in oxygen concentration, for example, which could make the addition of oxygen or air necessary (possibly other gases as we…

Thermostat box with forced air circulation for 68 °F (tolerance 67.1 - 68.9 °F / 20 ±0.5 °C)OxiTop® Box is a benchtop model with hinged clear-view cover which can accommodate a maximum of either 12 OxiTop ® simultaneous measurements or 20 Karlsruhe bottles.The chamber is equipped with a connection for an IS 6 or IS 12 stirrer.A special compartment is provided for thermostatting 6 methylene blue samples.The box is made of non-c…