Cannabis Testing Products & Reviews

SPE Disks for Water Extraction

The MultiPurpose Sampler MPS is a multifunctional autosampler and sample preparation robot for GC (GC/MS), LC (LC/MS) and standalone operation. Sample preparation steps are performed during the analysis of the preceding sample for best system utilization and highest sample throughput. Sample preparation steps are performed in a controlled and highly accurate and reproducible manner for best possible results. Every step is se…

Fully automated IR digestion due to precise temperature control The automatic SpeedDigester K-439 features precise temperature control and an easy to read graphical display which allow for an easy and automated digestion process and uniform, standardized sample processing. The complete digestion process occurs through precise temperature/time control. The temperature control makes it possible to verify the temperature with an…

Shimadzu's Nexera is a genuine all-around HPLC that enables various types of analysis including conventional LC, ultra fast LC and ultra high-pressure LC up to 130 MPa without compromising performance and data quality. The LC-30A Nexera delivers high-speed and high-resolution analysis without sacrificing basic performance parameters such as excellent precision, near-zero carryover, good linearity, stability and ruggedness. O…

The Empower Chromatography Data System is Waters’ compliance-ready chromatography data software (CDS) for advanced data acquisition, processing, and reporting that simplifies the management of chromatography test results.

Designed for use with the Bioneer AccuPrep® 96-well plate series - handles 96 samples simultaneously for high throughput DNA extraction. Simply attach to a vacuum pump for easy processing of all AccuPrep 96-well plate DNA extraction kits.

Triple EmissionThe TripleSplit 3-way image splitter from Cairn Research is a simple device for dividing an image into either one, two or three separate, spatially equivalent components which can be displayed side by side on a single camera chip. Download data sheet Splitting is usually performed on the basis of wavelength or polarisation, allowing applications where there is a requirement for simultaneous, or high speed, acqui…

Our flexible LaserBank system will launch up to five laser lines into up to five different single-mode fibres. This system can be configured with new lasers or, in most cases, with existing solid state lasers. Please contact us for details of your requirements. The flexible architecture allows lasers to be mounted for TIRF, FRAP, photolysis, confocal or widefield imaging. It provides analogue intensity control and digital swit…

LumiScope for the detection of bioluminescence from aequorin and other luminescence probes.

The PhoxX® Diode Laser Series is ideal for microscopic imaging applications due to its small and compact design, 18 different wavelengths between 375nm and 830nm, single-mode optical output powers up to 140mW, high-stability CW operation, high-speed digital and/or analogue modulation, electronic shutter function (laser inhibit) with >300kHz full ON/OFF capability, Automatic Aging Compensation (AAC) function, 0.7mm beam diamete…

The LuxX® Diode Laser Series is ideal for microscopic imaging applications due to its small and compact design, 18 different wavelengths between 375nm and 830nm, single-mode optical output powers up to 140mW, high stability CW operation (ACC and APC mode), fast analogue modulation, electronic shutter function (laser inhibit) with >150kHz full ON/OFF capability, Automatic Aging Compensation (AAC) function, USB2.0 and RS-232 int…

The LightHUB(R) Compact Laser Combiner can be equipped with up to four DPSS or diode lasers of different wavelengths in a compact and rugged design. Wavelengths between 375nm and 830nm and optical output powers up to 150mW per laser line are possible. The Compact Laser Combiners can be equipped with polarisation maintaining fibre coupling units to supply the light to applications in biotechnology like confocal microscopy and f…

The ANATOC II uses patented photocatalytic oxidation that decomposes all organic compounds in the sample to give carbon dioxide, water and the acid, base or salt of any other organically bound elements. The resulting CO2 gas is accurately determined. The ANATOC II provides fast, reliable analysis at negligible cost per sample, without the use of hazardous oxidising agents and clumsy and expensive compressed gasses. It is a co…

The Pippin Prep is a preparative electrophoresis platform for collection of size-selected DNA samples. The system automates DNA size selection using disposable, pre-cast agarose cassettes to extract fractions according to user-defined software input. Samples are electro-eluted from agarose and collected in buffer. The platform is used for the construction of next-gen sequencing libraries. The system collects fragments (depend…

The 2545 Quaternary Gradient Module is a four solvent, low pressure mixing gradient pump (up to 150 mL/min) that serves as a solvent delivery device for purification systems. Features: • Four solvent gradient selection • Control from MassLynx, Empower, or console allowing scale up via a familiar software interface • Interfaces to a variety of detectors and peak fraction collectors for optimum purifications • Allows UV or MS di…

When Sensitivity and Accuracy are Key

The preferred choice for steady-state and kinetic studies

Expand the Capability of a UV or Fluorescence Spectrometer

Using the most advanced proven technology in evaporation science, the third generation of the EZ-2 Series has been designed specifically for solvent removal in life science research; be that concentration of samples or complete drying.  The innovative design of the EZ-2 Series presents many advantages for working in parallel within synthesis chemistry, analytical sample preparation and for general-purpose solvent removal n…

High purity solvents for LC-MS and trace analysis with UV and fluorescence detection: 0.2 µm stainless steel filtered – perfect for use in UPLC and UHPLC. Very high UV-transmittance. Excellent baseline stability in gradient elution. Very low total ionic current (TIC) in LC-MS. Low level of ionic background and ion suppression. High ionization efficiency in all ionization methods (electrospray ionization/atmospher…

The Biochrom EZ Read 400 Flexi is an economically priced, easy-to-use microplate reader for 96-well plates, quick to set up and requiring minimal training. The simple, robust PC-controlled microplate reader has no un-necessary features and is ideally suited to labs with multi-level users performing absorbance assays The instrument is supplied with ADAP Basic PC software which is used for instrument control and to export of raw…

Quickly concentrate up to 20 mL of biological sample Pall Life Sciences Macrosep Advance Centrifugal Devices Features of the Microsep Advance Centrifugal Devices:  •  Rapidly concentrates 20 mL sample volumes to 0.5 mL.   •  Provides high recoveries, typically > 90%.   •  Low protein-binding Omega membrane and polypropylene housing minimize losses due to non-specific binding.   •  Versatile Omega membrane is available in a va…

Convenient and reliable concentration, purification, and diafiltration of 20 to 60 mL biological samples with Pall Life Science's Jumbosep Advance Centrifugal Devices Features of the Macrosep Advance Centrifugal Devices:  •  Typically concentrates 60 mL sample volumes to 5 mL in 30 minutes.    •  Provides high recoveries, typically > 90%.   •  Low protein-binding Omega membrane and polypropylene housing minimize losses due to…

  Pall centrifugal devices simplify common nucleic acid and protein handling procedures, replacing traditional separation techniques such as column chromatography, preparative electrophoresis, dialysis, gradient centrifugation, and more. Available in various membrane types to meet your application needs.  

AcroPrep™ Advance Filter Plates- Advancing sample preparation Features of the AcroPrep™ Advance Filter Plates:  •  Smooth well design – Provides consistency in filtration times, as well as efficient sample and bead recovery.   •  Optimized outlet tips – Minimizes sample leakage during incubation steps and reduces the presence of hanging drops following filtration.   •  New well geometry – Results in faster , more uniform filt…