Ideal for tissue culture usage or any non-toxic solution that requires aliquoted or aspirating/dispensing in a sterile environment. Nonpyrogenic, nonplugged pipet, individually wrapped in thermoformed paper/plastic wrap.
Transfer pipet with 1 mL and 2 mL graduations.
Ideal for tissue culture usage or any non-toxic solution that requires aliquoted or aspirating/dispensing in a sterile environment. This nonpyrogenic pipet has a 15 mL overfill capacity and is individually packed in an all-plastic wrapper.
RNase/DNase-free. Sterilized by gamma irradiation, noncytotoxic and nonpyrogenic Polyethylene flat top screw cap allows one hand manipulation and provides a level writing area.
These 5/16 x12 inch stainless steel support rods screw into the base of Corning® PC-200/210/220 series hot plate/stirrers.
Corning® magnetic stir bars are Polytetrafluorethylene (PTFE)-coated for increased chemical resistance. Ideal for use with Corning PC-610/620 stirrers.
High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is 9 lbs (4.1kg) and operates on 120VAC 60Hz.
120mm Center Cap Assembly for Corning® Reusable Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4512 series vertical sidearm flasks.
This is a replacement power pack for Corning® Slow-Speed Stirrers (SS2L, SS10L, SS4R, SS4L and SS10R), Submersible Stirrers (IM75 and IM150) and Multiple Position Stirrers (MP4L, MP5L, MP9L and MP4R). It operates on 120V/60Hz and is UL approved to meet needs in North America and other locations with similar requirements.
Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 8L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.
These 1 x 3/8 inch (2.54 x 0.95cm) Corning® magnetic stir bars are Polytetrafluorethylene (PTFE)-coated for increased chemical resistance. Ideal for use with Corning PC-210/220 and PC-410/420 stirrers.
Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 6L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.
45mm polypropylene cap Two 15.24cm stainless steel tubes Autoclavable Fits Corning glass and plastic vessels with GL45mm threads
Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 15L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.
Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 36L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.
Cap assembly for small biorecator with various fitting arrangements
Cap assembly for small biorecator with various fitting arrangements
Cap assembly for small biorecator with various fitting arrangements
100mm Center Cap Assembly for Corning® Reusable Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4500 and 4510 series vertical sidearm flasks.
High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is 9 lbs (4.1kg) and operates on 230VAC 50Hz.
Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 3L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.
These 3 x 3/4 inch (7.62 x 1.91cm) Corning® magnetic stir bars are Polytetrafluorethylene (PTFE)-coated for increased chemical resistance. Ideal for use with Corning PC-611 stirrers.
These 7/16 x 24 inch stainless steel support rods screw into the base of Corning® PC-600/610/620 series hot plate/stirrers.
These 100 mL Corning® optically clear polystyrene graduated cylinders are designed for aseptic and accurate dispensing of sterile culture media or other biological fluids. A polyethylene dust cover is included.
(This is the suggested replacement for 2028) 2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray…
