3M Empore Extraction Disks used in Environmental Analysis

10 Dec 2008

Samantha Rosoman

Campaign Coordinator

Product news

Solvents with Little Solubility for Water May Yield Low Recoveries. The correct choice of elution solvent is essential for consistently good recoveries in environmental analysis. Labs have encountered low (40-70%) and/or inconsistent recoveries when using methylene chloride (dichloromethane) to elute solid phase extraction disks as recommended in EPA Method 525.1 and other methods. These low recoveries arise from the inability of methylene chloride to displace and penetrate the water saturating the porous sorbent particles to which the analyte molecules are adsorbed. Similar behavior occurs with hexane, another solvent in which water has a very low solubility.

Improving Recoveries
Recoveries can be increased when the elution step is modified to incorporate a more water soluble solvent. Modification resulted in 85-95% recoveries for Method 525.1.

Modified Elution Scheme

1. Rinse the sample bottle with 5 ml ethyl acetate, add to the disk, and pull it through with vacuum.

2. Rinse the sample bottle with 5 ml methylene chloride, add to the disk, and pull it through with vacuum.

3. Rinse the glass reservoir with 5 ml 1:1 methylene chloride:ethyl acetate and pull it thorough the disk with vacuum.

4. Pass the combined eluate through a sodium sulfate drying column and into a collection vial for evaporation. Gently evaporate the eluate and check the concentration efficiency using spikes. (Aldrin and/or phenol are very sensitive indicators of concentration losses.)

Other Factors Affecting Recoveries
The solubility of water in the eluting solvent is only one factor to be considered. Also important are conditioning, sample bottle rinsing and method of concentration.

Related products

Request Quote for All Products

3M™ Empore™ C8 47 mm Disk
3M Bioanalytical
Commonly used for the solid phase extraction of analytes from complex sample matrices. A variety of functional groups, such as octadecyl (C18) and octyl (C8) can be bonded to the silica surface to provide non polar interactions. Each of these sorbents exhibits unique properties of retention and selectivity for a particular analyte. The choice of which sorbent is best for a particular method will be influenced by the percent recovery of analyte from the sample matrix and the cleanliness of the resulting chromatography.
(0)
3M™ Empore™ C18 47 mm Disk
3M Bioanalytical
3M Bioanalytical's Empore ci8 47mm Disk - Commonly used for the solid phase extraction of analytes from complex sample matrices. A variety of functional groups, such as octadecyl (C18) and octyl (C8) can be bonded to the silica surface to provide non polar interactions. Each of these sorbents exhibits unique properties of retention and selectivity for a particular analyte. The choice of which sorbent is best for a particular method will be influenced by the percent recovery of analyte from the sample matrix and the cleanliness of the resulting chromatography.
(0)
3M™ Empore™ Chelating 47 mm Disk
3M Bioanalytical
Empore™ Chelating Disks provide a way to selectively remove multivalent metal cations from solutions. This selectivity can be used to concentrate metals from a sample for analysis or to isolate and remove metal interferences from a complex organic or inorganic sample matrix. In the latter case, the purified filtrate is ready for use. The chelating disk has an affinity for multivalent (primarily 2+ and 3+) transition elements. The functional group exhibits differing ionic charges depending on the pH of the solution. At pH 2, the carboxylate groups are neutral and the nitrogen has a net positive charge. This allows the sorbent to function as a weak anion exchanger. Increasing the pH ionizes the carboxylate groups and at pH =5, both are negatively charged. As the pH approaches neutral, the sorbent functions as a cation exchanger or a chelating resin.
(0)
3M™ Empore™ C8 90 mm Disk
3M Bioanalytical
Commonly used for the solid phase extraction of analytes from complex sample matrices. A variety of functional groups, such as octadecyl (C18) and octyl (C8) can be bonded to the silica surface to provide non polar interactions. Each of these sorbents exhibits unique properties of retention and selectivity for a particular analyte. The choice of which sorbent is best for a particular method will be influenced by the percent recovery of analyte from the sample matrix and the cleanliness of the resulting chromatography.
(0)
3M™ Empore™ C18 90 mm Disk
3M Bioanalytical
3M bioanalytical's Empore c18 90 Disk-Commonly used for the solid phase extraction of analytes from complex sample matrices. A variety of functional groups, such as octadecyl (C18) and octyl (C8) can be bonded to the silica surface to provide non polar interactions. Each of these sorbents exhibits unique properties of retention and selectivity for a particular analyte. The choice of which sorbent is best for a particular method will be influenced by the percent recovery of analyte from the sample matrix and the cleanliness of the resulting chromatography.
(0)